Print Page | Close Window

Display instead interpret escape sequences

Printed From: Rocket Software
Category: AccuTerm Knowledge Base (read only)
Forum Name: Green Screen
Forum Description: General terminal emulation questions
URL: https://forum.asent.com/forum_posts.asp?TID=2733
Printed Date: March 28 2024 at 8:14am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Display instead interpret escape sequences
Posted By: jalosa
Subject: Display instead interpret escape sequences
Date Posted: December 19 2019 at 9:17pm
Hello:

Is there a way to have Accuterm (I have Accuterm 7) display control codes / escape sequences instead of interpreting and acting on them? Trying to determine what the server is actually sending the client.

Thanks Much



Replies:
Posted By: PSchellenbach
Date Posted: December 20 2019 at 9:31am
Hi Jalosa -

Probably the easiest way to escape sequences is to use the debugging version of AccuTerm. After installing the debugging version, you can start a debug log - look for AccuTerm Debug Log in the Start menu. Select atcommxxx from the program list (xxx could be 32, 71, 80, etc.). Click the atcommxxx tab. Select detail and either ssh or telnet options. Click OK to start the log. Switch  to AccuTerm window and run the problem app. Switch to the log window to see the data sent to/from the server.

The debugging version is available from the AccuTerm downloads page.

Thanks, Pete




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net