Print Page | Close Window

numeric keypad

Printed From: Rocket Software
Category: AccuTerm Knowledge Base (read only)
Forum Name: Green Screen
Forum Description: General terminal emulation questions
URL: https://forum.asent.com/forum_posts.asp?TID=2726
Printed Date: March 28 2024 at 11:05am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: numeric keypad
Posted By: dale kelley
Subject: numeric keypad
Date Posted: September 19 2019 at 4:29pm
I have installed Accuterm 7 on Windows 10 workstations on a Windows network as VT100 loging into UniVerse.  The numeric keypads issue esc sequences regardless of the NUM key.  None of my other systems has done this.  In Rocket's Dynamic Connect I have to set a "vtnumoff" switch.  I'm almost certain I don't have a term type conflict.  Is there some way for me to achieve that "vtnumoff"?


-------------
dwk



Replies:
Posted By: Shrek59
Date Posted: September 19 2019 at 6:54pm
Check: AccuTerm settings > Terminal

There is a section there named 'Terminal options'. If you have 'Keypad sends application codes' checked, then the return data is quite different (and includes control charactes) compared with "standard" (when only numeric data is returned). You can see the difference through:

AccuTerm settings > Terminal > Keyboard > Program the keyboard

(I have no idea what 'Application codes' refers to).

HTH

Brian


Posted By: dale kelley
Date Posted: September 19 2019 at 7:02pm
I think I've tried it both ways; normally I don't have it checked.  I have looked under >Program the keyboard and the numeric pad shows the right numbers but they are pale, like inacessable.


-------------
dwk



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net